The Ideal Logic F3 error code.
Ideal Logic Combi boilers are one of the most popular boiler models in the UK providing heating and hot water.
With over 4 millions boiler manufactured chances if you don’t have one chances are you will know somebody who does have one in their home.
However, like any other gas Combi boiler, they will encounter occasional errors and faults in its lifetime.
The F3 error code will stop the boiler working. Continue reading and we will delve into the faults which cause the F3 error and explore potential solutions to resolve it.
Ideal Logic F3 error Code
When the F3 error on an Ideal Logic Combi boiler happens,
this typically indicates a problem with the boiler’s fan. It occurs when the boiler’s fan fails to operate within the parameters it was designed to or when the fan sensor detects an issue.
When the Ideal LogicF3 error is activated, the boiler will shut down to prevent any potential damage or safety hazards.
Possible Causes of an F3 error code
Several factors can contribute to the F3 error.
The most common cause is a fault in the fan assembly,
Typical causes of destructive fan failure
worn-out motor
damaged fan blades.
Water in the fan causing a short circuit.
The fans circuit board burns out.
Additional causes, such as a blocked or restricted air intake or exhaust vent can hinder the proper functioning of the fan, leading to the F3 error.
Moreover, issues with the fan speed sensor or its connection can also trigger the error code.
Loose electrical connection or breaks in wire contacts will also cause an F3 error
Fixing the Ideal Logic F3 Error code
Resolving the F3 error on an Ideal Logic Combi boiler requires requires you to employ the services of a Gas safe Registered engineer they have the necessary qualifications to allow them to work on your boiler legally and competently.
They will inspect the fan assembly, check the fan motor, blades, connection and get to the bottom of what was causing the f3 error code on your ideal logic boiler.
They may also clean or clear any obstructions in the air intake or exhaust vent to ensure proper airflow.
There are no serviceable parts on an Ideal Logic Combi Boiler Fan so if it is faulty it will need to be replaced.
Getting your Ideal Logic Combi boiler working again
Encountering the F3 error on an Ideal Logic Combi boiler can be a frustrating experience for homeowners and tenants.
However by understanding the possible causes and seeking expert help straight away can enable a swift repair and get your boiler up and running again. By consulting a qualified professional and having the necessary repairs carried out, you will be able to enjoy reliable heating and hot water once again.
Give us a call
You are welcome to give us a call on 01274 317169 or fill out the Contact Us form.
We charge an initial £78.00 including VAT to perform an initial diagnostic investigation into the cause.
If the issue only requires something to be tightened up or a slight adjustment there will be no further cost to you.
If parts are required, then a quote for parts and labour will be given to fix the cause of the F3 error code on your ideal logic boiler.
